Illustrative imagePumps & Nozzles · Supplier in Nigeria
Submersible & Dewatering Pumps
Electric submersible pumps that sit in the liquid, for dewatering, drainage, sumps and wastewater.
Sealed motor, runs fully submerged · Strainer or cutter inlet · Flanged or hose outlet
About Submersible & Dewatering Pumps
The motor and pump are one sealed unit lowered into the liquid, so there is no suction line to prime and no pump room to build.
We supply drainage pumps for clean water, heavier units for sludge and solids, and explosion-protected (ATEX) versions for hazardous areas. Give us the depth, the flow and what is in the water.
Typical applications
- Site and excavation dewatering
- Sumps, drains and pits
- Wastewater and effluent
- Flood and stormwater control
More Pumps & Nozzles
View all Pumps & Nozzles
Centrifugal Pumps
End-suction and process centrifugal pumps on baseplates, for water, hydrocarbons and general process service.
End-suction and inline designs · Flanged suction and discharge · Supplied with motor and baseplate
- Standard
- API 610 / ISO 5199 / ASME B73.1
- Materials
- Cast iron, carbon steel, 316 stainless, duplex
Gear Pumps
External gear pumps that deliver a steady, measured flow of oils, fuels and other lubricating liquids.
Positive displacement · Handles thick liquids · Close-coupled or on baseplate
- Standard
- API 676
- Materials
- Cast iron, ductile iron, stainless steel
Screw Pumps
Twin- and three-screw pumps for crude, heavy fuel and viscous liquids at high pressure with low pulsation.
Twin-screw and three-screw · Low pulsation · High suction lift
- Standard
- API 676
- Materials
- Cast steel, ductile iron, stainless steel
Diaphragm & Chemical Dosing Pumps
Air-operated double-diaphragm pumps for transfer, and metering pumps for accurate chemical injection.
Air-operated or motor-driven · Runs dry without damage · Adjustable dosing rate
- Standard
- API 675 (metering) / ATEX on request
- Materials
- Aluminium, 316 stainless, polypropylene, PVDF
Fire-Water Pump Sets
Split-case and end-suction fire pumps on baseplates, electric or diesel driven, for fire-water ring mains.
Split-case or end-suction · Electric or diesel drive · Jockey pumps and controllers
- Standard
- NFPA 20 / UL and FM listed options
- Materials
- Cast iron or bronze casings, bronze or stainless impellers
Pump Spares: Seals, Impellers & Bearings
Mechanical seals, impellers, bearings, wear rings and O-ring kits to keep existing pumps running.
Cartridge and component seals · Impellers and wear rings · Bearings and O-ring kits
- Standard
- API 682 (seals)
- Materials
- Bronze, stainless and duplex impellers; carbon, silicon carbide and tungsten carbide seal faces
Spray Nozzles
Machined full-cone, hollow-cone and flat-fan spray nozzles for cooling, washing, scrubbing and deluge.
Full-cone, hollow-cone and flat-fan · NPT and BSPT threaded inlets · Range of orifice sizes and angles
- Materials
- 316 stainless, brass, PVDF, silicon carbide
Vessel Nozzles & Long Weld Necks
Long weld neck (LWN) forgings and nozzle necks for connecting pipework to pressure vessels, tanks and columns.
Long weld neck and heavy-barrel · Raised face or ring-type joint · Bored and bevelled to order
- Standard
- ASME B16.5 / B16.47 / ASME VIII
- Materials
- ASTM A105, A350 LF2, A182 F316L, duplex